published date : apr 06,2005 drawing no : xdsa7693 v1 checked : b.l.liu p.1/3 www .sunled.com part number: XZZE64W-3 subminiature solid state lamp part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. XZZE64W-3 red ingaalp water clear 1500 2490 640 20 absolute maximum ratings (t a =25c ) ) ) ) ze (ingaalp) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10duty cycle 0.1ms pulse width i fs 150 ma power dissipation p t 120 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 ze (ingaalp) unit forward voltage (typ.) (i f =20ma) v f 2.2 v forward voltage (max.) (i f =20ma) v f 2.8 v reverse current (v r =5v) i r 10 ua wavelength at peak emission (i f =20ma) peak 640 nm wavelength of dominant emission (i f =20ma) d 630 nm spectral line half-width (i f =20ma) ? 25 nm capacitance (v f =0v, f=1mhz) c 27 pf operating characteristics (t a =25c ) ) ) ) notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. features g subminiature package. g gull wing. g long life - solid state reliability. g low package profile. g package :1000pcs / reel. g rohs compliant. preliminary spec
published date : apr 06,2005 drawing no : xdsa7693 v1 checked : b.l.liu p.2/3 www .sunled.com part number: XZZE64W-3 subminiature solid state lamp ze
published date : apr 06,2005 drawing no : xdsa7693 v1 checked : b.l.liu p.3/3 www .sunled.com part number: XZZE64W-3 subminiature solid state lamp recommended soldering pattern (units: mm ; tolerance: 0.1) remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters. tape specification (units : mm)
|
